The Different Types of Recirculating Hot Water Pumps, Its Advantages and Disadvantages

Waiting is something people do not have enough patience for. There are just so many things that needs to be done that we hasten for each and every event to finish as quickly as possible and not use up precious time. Heating water takes away our time if we use the standard heater. With this type, you have to wait for the water to be heated which usually takes a few minutes. Another issue with utmost importance is the conservation of water.

However, while still using the standard type or the tank type water heater, you can have hot water as soon as you need it by using a device, the recirculating hot water pump. Through this nifty device, draws hot water from the tank type water heater. The cooled off hot water is replaced with freshly heated water while the cooled off hot water is sent back to the heater via the cold water lines.

In contrast to that, with the standard heater when the hot water tap is turned on, the stored hot water has already cooled off, thus it needs to be heated again. 

Some systems of recirculating water pump are installed at the farthest fixture and a push button is used to start the pump. A disadvantage with this type is its high voltage requirement for it to operate.

Another one can be activated by a remote pump and is set up close to the water heater. Its shortcoming is it pumps water everytime the temperature cools down at the activation valve.

The best recirculating hot water pump system is the one with the temperature controlled valve under the furthest sink with a built-in timer that can be installed adjoining the water heater. The timer can be pre-set according to your desired time. This type can conserve water the most at the same time reducing energy waste. 

Why Do You Need to Switch to On Demand Water Heaters?

Water is a basic necessity to survive. We use it in different ways and its cleanliness is vital. However, using cold water is not comfortable, thus we need it heated at just the desired temperature. On the other hand, standard water heaters waste too much water and use up much energy.

The conventional heaters being used at homes or commercial buildings are the type which stores warm water in the tank and by the time you need hot water, it gets cold because it is mixed with cold water. So what happens is the heated water is flushed down the drain unused and wasted. The time waiting heating the water also causes water loss. By using on demand water heaters, at the end of the month, you won’t be saddened by high utility bills anymore, at the same time you conserved natural gas.

On demand hot water heaters, also called tankless water heater simply means heating the water only when it is needed. Once the faucet is turned on, cold water quickly travels into the heating device and warmed immediately, then comes out of the tap. This type of on demand water pump can be installed at more than one-point-of-use throughout the house and can supply the water required by the household. Despite of its high cost upfront, in the long run, the amount of money saved is undeniably big.

Since on demand hot water heaters have different models, you also need to assess as to which one fits your needs at home or in a commercial building. Find out the answer to the following questions to buy the right model: How cold is the water that enters your house? ; How much hot water do you need and how fast or slow?; What is your desired temperature of water?

How a Recirculating Hot Water Pump Give Hot Water Fast

You turn on the hot water tap, but the water is cold, so you wait for it to be heated. You wait and wait. This waiting time is wasting a lot of water and energy. It is just so impractical. It not only pours precious water down the drain but also a substantial amount of money is spent on utility bills. How you wish you can have instant hot water as soon as you turn on your faucet.

A recirculating hot water pump can give you hot water as fast as a tankless water heater can, but still using the tank type water heater. What is a hot water recirculating pump anyway and how does it heat water fast?

But first, let us know what a tank type water heater is. This kind of heater stores hot water in the pipes waiting to be used until it gets cold, so energy is wasted. When you turn the hot water valve the moment you need it, the water has already cooled down, so the cooled water is replaced with fresh hot water. The pipes have to be heated first and take several minutes. There is a waste of energy, water and time.

On the other hand, with the hot water recirculating pump device, the cooled off hot water flows back to the water heater via the cold water line and replaced with fresh hot water which flows out of the faucet. You don’t have to wait for a long time. No water is flows down the drain.

Let us always opt for systems which conserve water.

Demand Controlled Water Pump Helps Save Earth

Every living organism needs water. We cannot survive without it. Without water we will become stinky, hungry and weak. The least we can do is to use it wisely and conserve it the best way we can. Sadly, people’s lifestyle has demanded too much water in a day, and worse has led to much water running down the drain, just wasted.

Water temperature may not be desirable and so this has to be adjusted. Hot water is a necessity. However, the newly-built houses are much bigger than before with modern hot water fixtures that use up too much water, thus slowing water flow and wasting water while getting it hot. Incorrect design of hot water distribution system can create heat losses, therefore wasting another form of energy. With the use of recirculating pumps, water waste was decreased, but the energy consumption increased.

The good thing is on demand water pump was then realized and was more efficient. As its term says, on demand, the recirculating of hot water is based on the demand at real-time, thus, lessening the water and energy loss. It can also return the hot water to the pipe or at the designated line.

Just push the button control, and immediately sends water to the heater until it comes out where it is needed.

On demand water pump is very ideal and efficient for hot water delivery as is posts demand controller and produces water as desired by the user. It can also work with the various hot water heating systems.